Speaking of the photo machine, it is necessary to mention the configured nozzle, which is an indispensable key to selecting the configuration and normal printing, and can determine the progress of the production taskeffectfinalOutput quality. This is the characteristics of the photo machine nozzle as the core electronic accessories, naturally has become a lot of friends love and hate the object, "arrogant" is vulnerable to external influence damage, to the photo printing experience brings a lot of trouble.

Therefore, after the photo machine is printed or completed, the user needs to carry out timely and effective maintenance measures on the nozzle, which I believe everyone knows, but it is really difficult to do. It takes patience and experience, starting with daily boot tests,It is easy to return to the position at the end of shutdown, maintain efficient production, and extend service life.

1, operation matters

Start and shut down requirements: start the machine first proofing test, make sure that the printing status is normal before production; Turn off the control software before shutdown, make sure that after the car nozzle and ink stack are back sealed,Then turn off the main power switch;

Esd requirements: The machine must be grounded and installed according to the technician's requirements. Reduce triboelectrification during material moving; The human body contains static electricity. When touching the nozzle, wear professional gloves and install it under the guidance of technicians.

2, careful choice

Choose the original ink: It is recommended to use the original original photo machine ink, such as the outdoor weak solvent (oily) used by Audley photo machine./indoorWater-based ink, bright color, smooth and delicate, prevent plugging, guarantee after-sales maintenance;

Select other accessories: Photo machine for each brandThe accessories used are different, not the same type of accessories are easily used to cause short circuit, voltage imbalance state, and serious burning and blocking nozzle.

3, daily maintenance

Install a voltage regulator: the photo machine nozzle is susceptible to damage caused by the working voltage, and the voltage is unstable or the power is usedWhen the machine is too large, please configure the pressurizer to protect the nozzle;

Temperature and humidity: Photo machine suitable for printing temperatures in15°C-30°C,humidness35%-65%Too high or too low will affect the printing effect;

Dust removal: Regularly clean the accumulated dust on the machine to reduceStatic interference and dust erosion of the nozzle;

The consumables of the photo machine are ink and printing media, if you do not want the nozzle to join them, please carry out routine cleaning and maintenance work, reduce costs and consumption, and create profits more easily and happily!