Banner machineIPHow to set?

If you are using Huitong software

The network is set to automaticIPAddress is enough

Banner machine does not print all wrinkle cloth how to do?

You can tighten the resistance to see if it can be solved, if not

Adjust the print on the head beam5screw

Crease that way. Which way to turn

Banner machine "circlip cover" loose how to do?

Place the spring behind the screw

Clamp the underside of the spring with the long screw on the spring cover

Turn the spring cover counterclockwise andOKthe

Banner machine appears blue screen or black screen how to do?

Open the right side casing wide

Check whether the display cable is properly inserted

If it's plugged in, it's the display

Check whether the mainboard is on

If the lights are on, it's a motherboard problem

If the lights aren't on, the power's out

Banner machine printing "thin line" how to do?

If it's a dotted line

The heating power should be increased appropriately

If the print head is the position of the joint

Just spell it againOKthe

If it were any other location

I'll have to replace the print head

Banner machine printing temperature is too high how to do?

Reduce the heating power appropriately

The tank can be cooled by filling with water

What are the routine maintenance of banner machine?

When cleaning the print head, first turn off the power, lift the print head,

dip95%Alcohol cotton, clean up the mess on the print head,

Put the print head down and let the alcohol evaporate naturally

Before the banner machine is used, provide the normal power supply of the regulator

And ground cables, anti-static brush to protect the print head