If a worker wants to do a good job, he must first sharpen his tools.

Digital printing machine as a printing machine, daily maintenance is very important, effective maintenance skills can extend its service life, bring more economic benefits for manufacturers. Today, I will share with you some maintenance skills of digital printing machine.

 

Tips for cleaning sprinkler head:

①When cleaning, a thin rubber hose can be placed in the front end of the medical syringe and loaded with a strictly filtered cleaning solution for washing. When rinsing, use a magnifying glass to carefully observe the spray hole. If there is a silted residue near the spray hole, it can be removed with a soft rubber product. The integrated printing head that has been unused for a long time is blocked by the drying of ink and can be cleaned after being soaked in hot water.

②Do not use sharp objects to clean the nozzle, do not hit the nozzle, do not touch the nozzle with your hands.

③Do not disassemble or install the sprinkler head in a live state. Do not touch the electrical contact on the sprinkler head with your hands or other objects.

④Do not remove the nozzle from the digital printing machine and place it separately, and do not place the nozzle in a dusty place.

Maintenance tips:

01Humidity control.

      As we all know, the drier the weather, the easier it is to generate static electricity, and too much static electricity will cause great loss to the nozzle of the digital printing machine, so it is crucial to maintain the humidity of the working environment of the printing machine. Audley printing machine optimal operating environment humidity is40％~60％Therefore, the indoor humidity is adjusted in advance before work to avoid the working environment is too dry, resulting in machine failure.

 

02Inks with high viscosity are not suitable  

Although the weight of the ink drop is too large to reduce static electricity, but the viscosity is too large to the digital printing machine nozzle crystal. It is recommended that the ink used must use the original ink of the manufacturer, which is not only weather-resistant, but also compatible with the printing machine produced by the manufacturer, and can maximize the best printing effect of the printing machine.

03Clean the nozzle and cartridge regularly

Because the ink standing time is too long, it may cause precipitation, so the digital printing machine should regularly clean the nozzle and ink to avoid the phenomenon of partial oil circuit blockage. In this way, its print quality can also be effectively guaranteed.

 

04Good dust prevention

Indoor dust work, can not be put together with the machine prone to smoke and dust, to avoid nozzle blockage. Digital printing machine nozzle and inkjet hole, such as dust, small debris into the nozzle, nozzle blockage, easy to dirty the ink nozzle panel, and eventually lead to the adverse phenomenon of inkjet.

05Check the scraper and ink stack regularly

Check the cleaning condition of the scraper and ink stack at least once a week. If there is debris such as hair, please remove it with tweezers or facial tissues. If the blade is deformed or damaged, replace it with a new blade.

Do you understand how to maintain the printing machine and what you need to pay attention to? If in doubt, you can leave a comment below the article; For more information about the equipment, you can also call Audley Service hotline:400-6179998.You can also scan the QR code below: