hasAfter entering the summer, the temperature is getting higher and higher, especially the annual rainfall in the southern region of China can reach1700mmThe summer temperature can reach41℃, humidity can reach95%Around, if our machine is not properly maintained, it will easily fall off the chain!Thus summeryPiezoelectric photo machineEquipment maintenance is extremely important, and it is of great significance for the safe and normal operation of our equipment in high temperature environment!
Henan Audley digital reminds customers to pay special attention to the following points for the maintenance of piezoelectric photo machine:
(1)The photo machine should use a special strip when working. Photo machine is a large equipment, its own power is large. Especially in summer, all regions enter the peak of electricity consumption, so it is more prone to voltage instability than other seasons. If the work, plug in and then connect other equipment, it is easy to short-circuit phenomenon, resulting in print interruption.
(2)The temperature of the working environment of the photo machine is controlled at15-30℃If possible, install cooling devices such as fans and air conditioners to help cool the air;The indoor humidity is controlled at35%-65%In between, the summer is rainy, and indoor dehumidification should be carried out if necessary.
(3)To keep the nozzle in a clean and humid environment, it is recommended to place a thermometer and hygrometer in the workplace of the photo machine to ensure a certain temperature and humidity in the workplace.(15℃-35℃,10%-70%Relative humidity, non-condensing state)Do not place the ink head in a high or low temperature environment, and ensure that the indoor dust is not too large.
(4)Take care to turn off the built-in drying system. Due to the high temperature in summer, it is not recommended to open the drying system. If you want to speed up the drying speed of the picture, you can use an external air drying system, which is more conducive to extending the service life of the photo machine.
(5)When it is hot and dry, the photo will produce a lot of static electricity, and static electricity will produce additional losses for the photo machine, so it is necessary to often sprinkle water on the ground to increase the humidity of the air, and at the same time connect the ground wire to the photo machine to prevent static electricity.
With the above few valuable suggestions, then the equipment will easily spend the summer, I hope to help you!
Henan Audley Digital Technology Co., Ltd. to provide you with piezoelectric photo machine, outdoor photo machine, indoor photo machine, domestic photo machine, welcome to inquire.
