During the National Day holiday in order to ensure that your machine runs well after the holiday, please be sure to do a good job of maintenance of the machine before the holiday, the specific operations are as follows:
First, pay attention to the use of machines before holidays:
1.Apparatus common accessories:Ink pad, scraper, grating, rail maintenance and inspection work
2.Make sure that the nozzle status test strip is completely fine, pour special moisturizing liquid on the ink pad,(Note the ink pad
Do not overflow the moisturizing liquid to the nozzle data line interface, resulting in short circuit)The nozzle fits the pad and then shuts down
3.Close the ink tube valve or tie the waste ink tube tightly with cable ties,Prevent ink leakage
4.The machine must be completely disconnected during the holiday
5.Powder machine clean, powder needs to be all clean out, and placed in the plastic bag to avoid moisture
6.The machine is wrapped in cloth and put mothballs in the left and right boxes to prevent rats from chewing through the wires
Second, note before printing after the holiday:
1.The white ink cycle should be opened when starting15to30Minutes, then inking ink to clean the printing test strip, make sure there is no problem and then start printing;
2.When printing for a long time, it is necessary to open the color strip to avoid blockage of the nozzle
3.All ink is shaken before it is added
4.The large cartridge is kept for three months to clean the sediment
5.White ink machine the best ambient humidity45%to60%, temperature20℃to30℃
Finally, I wish you a happy holiday!
