After the start of winter, the weather is cold and the indoor and outdoor temperature is low. For the printing work of the photo machine, the platform heating system and dryer of the photo machine should be reasonably opened to deal with the environmental impact of low room temperature and wet weather.
With the rapid change of temperature, the photo machine spray drawing, often encounter the problem of slow ink drying time, especially in the case of urgent orders, such as the color of the pattern picture, the pattern block in a large area of red, black, pure color of the large block pattern, often after the print output, the picture is too late to dry, and the problem of picture adhesion is easy to appear.
In addition to the urgent production task, the auxiliary use of the external dryer of the photo machine and the platform heating system is very important at this time, opening the external dryer of the photo machine can quickly dry the picture, synchronously heat the pattern picture and dry the pattern surface when printing out, shorten the drying time of the picture, improve the work efficiency of the photo machine, and quickly complete the urgent order of inkjet printing.
For photo machine users, in the cold and low temperature climate environment in winter, we should also pay attention to the following matters, more for the photo machine to improve the efficiency of the inkjet drawing, but also to protect the photo machine.
1: Reasonably adjust the temperature and temperature of the printing workshop of the photo machine. If possible, you can install air conditioning and other equipment to adjust the temperature to15The degree of-30Between degrees, to the photo machine a comfortable inkjet printing environment.
Two: If your photo machine is not equipped with the relevant heating system and dryer, you can configure an external dryer for the photo machine. Warm tips, the micro piezoelectric photo machine developed and produced by Odley Digital, equipped with wind drying or infrared drying, can quickly dry the ink on the photo surface in winter, providing an effective guarantee for the next rolling paper and laminating processing. Black sharkH1Industrial four-head photo machine adopts intelligent induction drying system, infrared heating and blowing synchronously, to maintain industrial high-speed production state.
Three: The use of photo machine manufacturers original ink, in different climate environments, temperature, humidity will affect the use of photo inkjet ink, ink produced by different manufacturers, raw materials and composition are different, such as ink drying speed, color performance, ink fluency and so on are different. Recommend users to use the manufacturer's original ink, quality assurance, good color performance, good fluency, good dryness, refuse inferior ink, do not covetously cheap and choose inferior ink, because of small and lost, to understand the eternal product law, cheap without good goods, good goods are not cheap!
The above three, I hope that loyal Audley photo machine users must pay attention to the photo machine a satisfactory environment and high-quality consumables, so that the photo machine can create greater returns for you, for your printing business to bring more profits!
